Texas DPS CDL warm-up test

  • Questions50
  • Correct to pass40
  • Passing score80%
  • Minimum age18 years

10 questions. Pick an answer to see if it is right and why; you need 8 correct answers to pass.

  1. 1. When must a driver first inspect the cargo and its securement devices?

    Show answer

    Answer C: Before starting the trip, as part of the pre-trip inspection

    Cargo is part of the pre-trip inspection; the later checks within 50 miles and every three hours or 150 miles come on top of that first inspection.

  2. 2. You are loading a flatbed that has no sides or bulkheads. How must the cargo be held?

    Show answer

    Answer D: By tiedowns, blocking or bracing, since there are no walls to keep it from shifting or falling off

    Open decks depend entirely on securement devices; every article must be tied down or otherwise immobilized so it cannot move, spill or fall.

  3. 3. How often must every commercial motor vehicle receive a periodic inspection?

    Show answer

    Answer C: At least once every twelve months

    Federal rules require each commercial motor vehicle to pass a periodic inspection at least once in every twelve month period.

  4. 4. Why must the downshift be finished before you reach a steep downgrade or a sharp curve rather than during it?

    Show answer

    Answer D: Because once your speed is too high you may not get into any gear at all

    If you wait until speed has built up, the lower gear may refuse to engage and you can be left in neutral with no engine braking at all.

  5. 5. When should a lower gear be selected for a long downgrade?

    Show answer

    Answer D: Before you start down the hill

    The gear is chosen at the top, while speed is still low, because a heavy vehicle already rolling fast may not go into a lower gear at all.

  6. 6. Where are the OVERSIZE LOAD signs normally carried on a vehicle moving under such a permit?

    Show answer

    Answer A: On the front and the rear of the vehicle

    The warning signs face the traffic that meets the load and the traffic that comes up behind it, so they go on the front and the rear.

  7. 7. How do objects appear in a convex mirror compared with a flat mirror?

    Show answer

    Answer B: Smaller and farther away than they really are, while a wider area is shown

    A convex mirror shows a wider field but shrinks everything in it, so the driver must remember that vehicles are closer than they look.

  8. 8. An overpass you have driven under before now has a fresh layer of pavement on the road below it. Why does that matter?

    Show answer

    Answer B: The new layer raises the road and reduces the clearance

    Repaving lifts the road surface, so the real clearance under a structure can be less than the height posted on it.

  9. 9. What tells you that an air suspension bag has a problem?

    Show answer

    Answer B: The bag is leaking or damaged, or the vehicle sits unevenly on that side

    An air bag that leaks or is cut lets that corner of the vehicle settle, which throws the load onto the other suspension parts and changes the ride height.

  10. 10. A delivery van is stopped in the right lane ahead with its flashers on. What should you expect?

    Show answer

    Answer C: Someone may step into your lane from in front of it

    A stopped delivery vehicle hides the space in front of it, and that is exactly where a person carrying a package is likely to walk out.